DanVex AD-550 Manual de operação - Página 6

Procurar online ou descarregar pdf Manual de operação para Desumidificador DanVex AD-550. DanVex AD-550 12 páginas. Adsorption air dehumidifier

Control board (Introduction)

1) Switch: There are three positions on it:

-----

: Manual (MAN) working mode (It means that dehumidifier will continuosly run till

power OFF);

: Power OFF position

===

: Automatic (AUTO) working mode (Automatic running, and it will be pause (turn

in "Standby") while the ambient humidity reached setted humidity level. Meanwhile once the

ambient humidity becomes higher than the setted RH data, the dehumidifier re-work

automatically);

2) Humidistat Cx2010 - showing humidity.

a) There are three states while it works: testing state, inquiring about the state and state of

setting up.

b) Testing state: starting up, it automatically go to test state, upper LED screen (there are

three numbers totally in the screen) shows the ambient RH level it testing, lower LED screen

(there are three numbers in the screen) shows the setted RH level.

c) State of setting up: Click "O" button, the upper LED screen will show the defaulted value

"080", click "UP" or "DOWN" button to change the value into your desired value. Then click

"O" again, the upper LED screen shows "SHS", the lower LED screen shows the defaulted

return difference "005". Click "UP" or "DOWN" to change the return difference into your

desired value, such as "001", "002", "003", "004" and etc. End, click "O" button to finish all

settings.

Note: defaulted value is "080" (80%), and the return difference is "005" (5%), it means that:

while the ambient RH levels higher than 80%, it will works; while the ambient RH level is

lower than 75% it will pause.

3) Indicator of heater temperature

4) Timer - clockmeter, showing the working time of dehumidifier