Audiotec Fischer Match UP 7BMW Manual - Página 2

Procurar online ou descarregar pdf Manual para Amplificador Audiotec Fischer Match UP 7BMW. Audiotec Fischer Match UP 7BMW 15 páginas. 7-channel plug & play upgrade amplifier with integrated 8-channel 64 bit dsp for bmw hifi sound systems

Imprimir página

Dear Customer,

Congratulations on your purchase of this innovative

and high-quality MATCH product.

Thanks to more than 30 years of experience in

research and development of audio products this

amplifier sets new standards in the evolving plug

play market.

General installation instructions for MATCH

components

To prevent damage to the unit and possible injury,

read this manual carefully and follow all installation

instructions. This product has been checked for

proper function prior to shipping and is guaranteed

against manufacturing defects.

Before starting your installation, disconnect the

battery's negative terminal to prevent damage

to the unit, fire and/or risk of injury.

Install your UP ?BMW amplifier only at the original

mounting place of the original amplifier by using the

included mounting plate.

For a proper performance and to ensure full war-

ranty coverage, we strongly recommend to get this

product installed by an authorized MATCH dealer.

We wish you many hours of enjoyment with your

new MATCH UP ?BMW.

Yours,

AUDIOTEC FISCHER

General instruction for connecting the UP 7BMW

amplifier

The UP ?BMW amplifier may only be installed in

motor vehicles which have a 12 Volts negative ter-

minal connected to the chassis ground. Any other

system could cause damage to the amplifier and

the electrical system of the vehicle.

The positive cable from the battery for the entire

sound system should be provided with a main fuse

at a distance of max. 30 em from the battery. The

value of the fuse is calculated from the maximum

total current draw of the car audio system.

Use only the included MATCH cable for con-

nection of the UP 7BMW. The use of other

cables can result in damage of the ampli-

fier, the head unit I car radio or the connected

loudspeakers! The fuses of the amplifier may

only be replaced by identically rated fuses

(2 x 25 A) to avoid damage of the amplifier.

Prior to installation, plan the wire routing to avoid

any possible damage to the wire harness. All

cabling should be protected against possible

crushing or pinching hazards. Also avoid routing

cables close to potential noise sources such as

electric motors, high power accessories and other

vehicle harnesses.