Contacta HLD4 Manual de instalação e do utilizador - Página 12
Procurar online ou descarregar pdf Manual de instalação e do utilizador para Aparelho auditivo Contacta HLD4. Contacta HLD4 20 páginas. Hearing loop driver
Imprimir páginaDirect Audio Connections
•
The best way to connect your hearing loop driver to your TV and
other audio devices is by using direct audio connections. These
connections give you the clearest sound without any background
noise.
•
The HLD4 hearing loop driver is fitted with digital and analogue
audio inputs.
•
Most current TVs and audio equipment have digital optical TOSlink
or coaxial outputs that provide the clearest sound input to your
system.
•
Use the digital audio input select switch to choose the setting for
the digital audio connection in use. You may need to alter the set-
tings of the digital audio out on your TV to PCM so that the digital
audio out signal matches the hearing loop driver.
•
Analogue audio inputs use red/white phono connectors. These
connectors are widely available on most audio devices and
provide good sound quality for your system.
•
You can connect up to three audio devices to your hearing loop
driver at the same time: one digital device using either TOSlink
or coaxial cable (but not both), and one or two analogue devices
using red/white phono connectors.
•
If your TV or other audio device does not have phono connectors,
you can use SCART or jack adapters to connect them to your
hearing loop driver. If you use a jack adapter with a headphone
socket on your TV or other device, this may turn off the internal
speaker. Some TVs have a switch or a setting that lets you keep the
TV speaker on.
12
Driver Connections