Contacta HLD9 Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para Aparelho auditivo Contacta HLD9. Contacta HLD9 20 páginas. Hearing loop driver

Imprimir página
Engineers mode – In this mode there are additional items that can
be adjusted, such as driver type, phantom power and high frequency
compensation.
You must first be in adjustment mode (see page 7). Then, to enter the
engineers mode, simply press both Line + and - simultaneously.
MIC
CLIP
ACTIVE
PHTM
There are 5 PAGE settings, each identified by a flashing MIC LED:
PAGE 1 is LED 1, PAGE 2 is LED 2, etc.
PAGE 1 allows you to select the driver operation; either PERIMETER,
PRIMARY or SECONDARY. Always select the driver operation mode
before installing the driver in its rack mount bracket.
MIC
CLIP
ACTIVE
PHTM
PAGE 1 is identified by
LED 1 flashing
8
contacta HLD9
LINE
CLIP
ACTIVE
LOW SIG
contacta HLD9
LINE
CLIP
ACTIVE
LOW SIG
Pressing the LINE + or - buttons
selects driver operation, Perimeter,
PRIMARY or SECONDARY
MIC
CLIP
ACTIVE
MIC
LINE
PHTM
CLIP
CLIP
ACTIVE
ACTIVE
PHTM
LOW SIG
Press both Line + and - simultaneously
to enter the Engineers' mode
PERIMETER
PRIMARY
SECONDARY
PERIMETER
PRIMARY
SECONDARY
When you are ready to move
onto the next PAGE press the
DRIVE + button
contacta HLD9
LINE
2.5
5
7.5
10
contacta HLD9
CLIP
PERIMETER
ACTIVE
PRIMARY
DRIVE
LOW SIG
SECONDARY
PERIMETER
PRIMARY
STATUS
SECONDARY
POWER
2.5
5
7.5
10
DRIVE
STATUS
POWER
2.5
5
7.5
10
DRIVE
STATUS
POWER
2.5
5
7.5
10
DRIVE
STATUS
POWER