Contacta IL-EL42-PF Manual de instalação - Página 8

Procurar online ou descarregar pdf Manual de instalação para Sistema de intercomunicação Contacta IL-EL42-PF. Contacta IL-EL42-PF 12 páginas. Hearing loop

Imprimir página

Installation Instructions - Flush

Identify and mark the surface for the hearing loop's back box

installation. Ensure any cables can be fed to the chosen location

and into the unit.

2. Create a 115mm x 115mm hole with 43mm depth in the required

installation location. This will contain the unit's back box.

3. On the sides of the back box, there are 8 circular blanks (see

below). Select an appropriate blank and remove it to create a hole

through which connections can enter the unit.

4. Using the outer 4 fixing points (see below), screw the back box

into place. Use 4 fixing screws (not supplied) suitable for the

installation location's construction material. If using a conduit, fit it

to the back box and feed through cabling.

5. Connect the unit's PCB – located on the rear of the face plate –

to both a power source and the relevant door entry system (see

Connections on page 4).

Circular

blanks

Fixing

points