Addonics Technologies HDUS4SNDX-A Manual do utilizador - Página 7
Procurar online ou descarregar pdf Manual do utilizador para Duplicador de discos Addonics Technologies HDUS4SNDX-A. Addonics Technologies HDUS4SNDX-A 7 páginas.
Imprimir página
ing one partition with the firmware file in the root directory.
NOTE:
This function scans the entire disk before proceeding. Providing a drive that is as small
as possible is strongly recommended.
11-03. Compare Firmware
Used to confirm correct firmware. Connect a drive formatted as FAT contain-
ing one partition with the firmware file in the root directory.
NOTE:
This function scans the entire disk before proceeding. Providing a drive that is as small
as possible is strongly recommended.
11-04. Quick Erase HDD
Scans the ports, then quickly erases all sectors on all connected drives.
11-05. Full Erase HDD
Scans the ports, then completely erases all sectors on all connected drives.
11-06. H/W Diagnostic
Starts comprehensive tests for Ram, LCD, buttons, ports and Flash.
11-07. Load Default
Resets all configuration settings to default.
11-08. Copy HPA
Enables copy functions to duplicate the source drive's Host Protected Area.
Normally this area is defined as not available to a host controller as defined
by ATA/SATA specifications.
11-09. Burn In
Runs a function continuously until aborted. Selections are Copy & Compare,
Compare, Async Cpy & Cmp, Async Compare.
CONTACT US
www.addonics.com
Phone:
Fax:
Email:
408-573-8580
408-573-8588
http://www.addonics.com/sales/query/