Contax TLA30 Manual de instruções - Página 11

Procurar online ou descarregar pdf Manual de instruções para Flash da câmara Contax TLA30. Contax TLA30 11 páginas. Modern classic slr series

Technical Specifications:
Type: Clip-on auto flash unit with direct TTL control; normal auto flash featuring built-in sensor on flash unit.
Guide numbers (ASA/ISO 100, meters): On AUTO - GN 30 to 4 (continuously variable); on MANUAL - GN 30 at full output; and
GN 15 and 7.5 at reduced output.
Control Circuitry: Energy-saving series circuitry with automatic flash cut-off. Mounting: To camera hot shoe directly, or by
Extension Cord for off-camera.
Flash Modes: TTL Auto, Normal Auto (with two aperture ranges), and Manual (with three-way guide numbers).
Flash Control: TTL Auto flash - SPD flash metering system housed in camera measures flash directly at the film plane and cuts off
flash output for correct exposure (Only on Contax camera with direct TTL auto flash metering system); couples at all apertures with
lens 'in use. Normal Auto - SPD sensor housed in flash unit automatically cuts off flash output, coupled at two aperture ranges
(f/4.0 and f/8.0 at ASA/ISO 100, m).
Angle of Coverage: 60° horizontal; 45° vertical (coverage for a 35 mm wide-angle lens). Wide Panel: 76° horizontal; 58° vertical
(coverage for a 24 mm wide-angle lens).
Color Temperature: Equivalent to daylight.
Power Source: Four 1.5 V AA size penlight batteries (rechargeable Ni-Cd type of same size also usable).
Recycling Times: Using alkaline-manganese batteries approx. 9 seconds (at full output).
Number of Flashes: Using alkaline-manganese batteries - approx. 100 (at full output).
Flash Range-Check: TTL Auto mode - indicated by LED mark " " inside camera viewfinder; Normal Auto mode - indicated by Auto
Check lamp on flash unit.
Bounce Angle: Up to 90° vertical (with click stops at 60° 75°, and 90°), down to 15° vertical.
Effective ASA Coupling Range: ASA/ISO 25 - 880 Flash Test: By pressing Test Button which doubles as Flash-Ready Lamp.
Other Features: Provided with Power Switch and Extension Cord Socket.
Accessories: Accessory Wide Panel, case and test sheet supplied as standard accessories.
Size: 80 (W) x 120 (H) x 60 (D) mm. Weight: 290 grams without batteries.
* Recycling Times refer to the time required for subsequent lighting of Flash-Ready Lamp, firing the unit using fresh batteries. ** Number of Flashes refer to the number of times the Ready Flash Lamp will light within
30 seconds of previous flash when flash unit is fired successively at 30 second intervals. *** The above specifications and design are subject to change without notice.
You can considered
Download a Copy
system chart for CONTAX flash group for your future reference (avoid if you can
unless you are looking for certain specific information critically - it will
if having multiple simultaneous downloads ....)
of the PDF file (1.9MB) of the entire
kill
my line