DAPAudio AS-8 Manual - Página 9

Procurar online ou descarregar pdf Manual para Misturador de música DAPAudio AS-8. DAPAudio AS-8 16 páginas.

AS-8

Set Up and Operation

Follow the directions below, as they pertain to your preferred operation mode.

Before plugging the unit in, always make sure that the power supply matches the product specification

voltage. Do not attempt to operate a 115V specification product on 230V power, or vice versa.

01) By means of the Main Input Level control (01), both main inputs interface with the input bus and the

main outputs.

02) Set the output level of the signals, summed by the second bus, by turning the Main Output Level

control (03). The signals will then be sent to the main outputs.

01) The main input signal is processed by the Balance control (06) to the output buffer mono channels'

amplifiers.

02) Turn the Level control (04) to set the output level of the respective channel.

01) The input signals are compiled through the Level control (04) and the Pan control (06). Subsequently,

they are sent to the output bus.

02) Turn the Level control (04) to set the amount of each channel at the output bus.

03) Turn the Pan control (06) to allocate the input signal to the left/right main outputs.

04) The input signal is routed to the appropriate mono outputs. The circuit functions as a matching

amplifier. Turn the Level control (04) to set level compensation.

Ordercode: D1904

Fig. 04