Duratool D03047 Manual de Instruções - Página 2
Procurar online ou descarregar pdf Manual de Instruções para Multímetro Duratool D03047. Duratool D03047 8 páginas.
Também para Duratool D03047: Manual de instruções do operador (10 páginas)
Imprimir página
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future reference.
•
Check the test leads, probes and case insulation before using. If you find any
breakage or abnormality, or you consider the device is broken, stop using the
device immediately.
•
When using the test probes, keep your fingers behind the finger protection
ring.
•
Do not use the meter with the back cover open.
•
Select appropriate test range for measurements.
•
Ensure all inputs are less than the range selected otherwise it may cause
electrical shock or meter damage.
•
Do not change the range selector position during voltage or current
measurements.
•
Do not apply a voltage exceeding the marked voltage between COM terminal
and ground.
•
Take caution when working voltages are above 60V DC or 30V AC rms.
•
Do not connect the meter to voltage signals when the range selector is on
current, resistance, diode or continuity range.
•
When measuring current, each single measurement should be shorter than 10
seconds.
•
When a measurement has been completed, disconnect the testing probes
from the circuit under test.
•
Replace the batteries as soon as the low battery indicator appears on the
display.
•
Remove dead batteries from the meter or if it is not going to be used for a long
time.
•
Never mix old and new batteries together, or different types of batteries.
•
Never dispose of batteries in a fire, or attempt to recharge ordinary batteries.
•
Before replacing the battery, turn off the meter and disconnect all the test
probes.
•
To prolong battery life turn off the meter after use.
FUNCTIONS
Model
DCV
D03046
P
D03047
P
ACV
DCA
P
P
P
P
Ω
P
P
P
P
2
hFE
P
P
P
P