Duratool D03055 Manual de início rápido - Página 2

Procurar online ou descarregar pdf Manual de início rápido para Termómetro Duratool D03055. Duratool D03055 4 páginas.

Imprimir página
Duratool D03055 Manual de início rápido
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future reference.
•
Please operate according to this manual, otherwise the protection provided by the
device will be impaired or fail.
•
Do not point laser directly in your eyes or indirectly off reflective surfaces.
•
Check the condition before using. If you find any cracking, breakage, damage or
abnormality, or you consider the device broken, stop using the device immediately
•
Do not use the thermometer if it operates abnormally. Protection may be impaired.
When in doubt, have the thermometer serviced.
•
Do not operate the thermometer around explosive gas, vapour, or dust.
•
To avoid a burn hazard, remember that highly reflective objects will often result in
lower than actual temperature measurements.
•
To avoid damaging the thermometer or the equipment under test protect them from
the following:
EMF (electro-magnetic fields) from arc welders, induction heaters, etc.
Static electricity.
Thermal shock (caused by large or abrupt ambient temperature changes –
allow 30 minutes for the thermometer to stabilize before use).
•
Do not leave the thermometer on or near objects of high temperature.
•
Replace the batteries as soon as the low battery indicator appears on the display.
•
Remove dead batteries from the thermometer or if it is not going to be used for a
long time.
•
Never mix old and new batteries together, or different types of batteries.
•
Never dispose of batteries in a fire, or attempt to recharge ordinary batteries.
•
Before replacing the battery, turn off the thermometer and disconnect all the test
probes.
•
To prolong battery life turn off the thermometer after use.
WHAT'S INCLUDED
•
Infrared thermometer with laser sighting.
•
Instruction manual
FEATURES
•
Single-spot laser sighting.
•
White backlight.
•
Celsius and Fahrenheit temperature measurement.
•
Low battery voltage indication.
•
LCD screen.
1.
Data hold icon
2.
Scanning icon
3.
Laser on icon
4.
Backlight on icon
5.
Low battery icon
6.
Fahrenheit unit
7.
Celsius unit
8.
Temperature reading
2
3
2
1
8
4
5
6
7