Duratool D03129 Manual de início rápido - Página 2
Procurar online ou descarregar pdf Manual de início rápido para Termómetro Duratool D03129. Duratool D03129 4 páginas.
Imprimir página
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future
reference.
•
When using electrical appliances basic safety precautions should always be
followed.
•
Before use, check that there is no damage to the instrument, there is no metal
exposed or sign of wear to the insulating layer of the probe.
•
When the low battery indicator is displayed, replace the battery immediately to
avoid any potential measurement error.
•
If the thermometer is not going to be used for a long period of time, remove the
batteries to avoid any potential product damage caused by battery leakage.
•
The instrument is not suitable for fast measuring changes in ambient temperature.
•
Do not allow the thermocouple probe to contact charged objects, otherwise it may
damage the instrument.
•
Do not fold the thermocouple leads, as repeated bending over a period of time
may cause the wire to break.
OVERVIEW
1. Room temperature sensor
2. LCD
3. Data hold key
4. Slide switch
•
OFF - Power off
•
°C - Celsius display unit
•
°F - Fahrenheit display unit
5. Range selection key: Range
switching 0.1 or 1 resolution
6. Thermocouple jack
7. K-type thermocouple probe
USAGE
•
Insert the K-type thermocouple into the thermocouple jack.
•
Move the slide switch to the "°C" or the "°F" position.
•
Place the thermocouple probe in contact with the measured object.
•
Read the results on the LCD.
•
If the value displayed is less than 200, you can choose to display 0.1 range
resolution by pressing the "RANGE" button.
Note: When the thermocouple is not inserted into the thermocouple or the
thermocouple is open, the instrument will display the temperature of the environment.