Duratuf Sentry Shed SL1507 Manual de instruções de montagem - Página 2
Procurar online ou descarregar pdf Manual de instruções de montagem para Armazenamento ao ar livre Duratuf Sentry Shed SL1507. Duratuf Sentry Shed SL1507 15 páginas.
Imprimir páginaCONGRATULATIONS ON PURCHASING A DURATUF SENTRY SHED.
BEFORE YOU BEGIN THE ASSEMBLY PLEASE NOTE SOME IMPORTANT POINTS:
•
Read all instructions carefully
•
Identify all parts and check quantities against parts list
•
Select a level site
•
Do not mark cladding with pencil as lead can cause corrosion to cladding
•
Do not attempt to build your shed in high winds
•
Beware of sharp edges, recommend use of gloves
•
Protect your eyes and ears
•
For ease of assembly, use a friend to help
DRILL
HAMMER
•
Wash all surfaces annually using a hose and soft nylon brush.
•
Within 2 km of coast – wash every 3 months as above. After a storm, wash the cladding and the gutters as soon
as possible to remove any highly corrosive salt deposits.
•
Volcanic Ash Fallout – wash as soon as possible, removing fall out from roof and gutters.
•
Do not allow manures, chemicals or other corrosive materials to have direct contact with cladding
BEFORE YOU START:
TOOLS REQUIRED:
RIVETER
NAIL PUNCH
WARRANTY REQUIREMENTS:
Following are the minimum requirements for cladding used in Sentry Sheds.
SAFETY:
SQUARE DRILL BIT
3.5mm DRILL BIT
TAPE MEASURE
8mm HEX DRIVE
2
LADDER
SKILL SAW
(timber floor only)
.