Duratuf SG2520 Manual de instruções de montagem - Página 14

Procurar online ou descarregar pdf Manual de instruções de montagem para Armazenamento ao ar livre Duratuf SG2520. Duratuf SG2520 16 páginas.

SECURING SHED

TIMBER PEGS—WOODEN FLOOR

 The optional Duratuf Timber Peg Down Kit includes six H5 treated timber

pegs that can be hammered into the ground and then attached to the

Base Plate with stainless steel screws. A Sentry timber floor can then be

fitted on top of the Base Plate.

BOLT DOWN KIT—CONCRETE

 The optional Duratuf Bolt Down Kit includes 6 x galvanised

brackets, screws and dynabolts.

 Space the brackets evenly around the shed and fix to the Bottom

Plate and the concrete slab. A 10mm masonry drill bit is required.

OPTIONAL SENTRY FLOOR

 Position the Floor Joists centrally between the side

Base Plates and skew nail each end with two 75mm

nails.

 Check that the shed is sitting level and square and

that the diagonal Bottom Plate measurements are the

same.

 Place the floor boards in position and nail securely

(10 x 50mm nails per board).

FIT PADBOLT

 Rivet Padbolt to door and keeper onto Door Jamb as

shown.

IMPORTANT— CLEAN UP

REMOVE ALL DRILL FILINGS FROM ROOF, WALLS AND CHANNELS THOROUGHLY. FAILURE TO DO THIS

WILL RESULT IN CORROSION AND COULD THEREFORE VOID THE WARRANTY

YOUR DURATUF SENTRY SHED IS NOW COMPLETE. RELAX......

Secure your shed using Treated Timber Pegs or a Bolt Down Kit

BACK BASE PLATE

JOIST

FRONT BASE PLATE