Duratuf Sentry SG3030 Manual de instruções de montagem - Página 8

Procurar online ou descarregar pdf Manual de instruções de montagem para Casas de jardim Duratuf Sentry SG3030. Duratuf Sentry SG3030 16 páginas.

Imprimir página

ASSEMBLE DOOR

SELECT:

3 x 1.810 m Door Sheets (Narrow)

2 x 0.945 m Door Top/Bottom Flashings

2 x 0.495 m Door Top/Bottom Flashings

4 x 1.810 m Door Side Flashings

2 x 1.160 m Door Brace Flashings

2 x 0.915 m Door Brace Flashings

1 x 1.810 m Weatherstrip

6 x Hinges

1 x Padbolt Support Flashing

103 x Rivets

STEP 1:

•

Lay out 2 x door sheets on a flat surface

making sure narrow pans are on the outside.

•

Rivet sheets together ensuring ends are

flush with each other.

STEP 2:

•

Position door side flashings and 0.945m top

and bottom flashings and assemble door as

shown, ensuring narrow face of flashing is on

the front as per fig.1

•

Drill and rivet as per diagram.

STEP 3:

• Attach hinges to door side flashing using rivets provided.

Ensure hinge is flush with back of door, and 60mm in from

each end as per fig.2.

• Using six rivets, attach padbolt support as shown in fig.3.

STEP 4:

• On the back of the door, place door braces in posi-

tion as shown in fig.4.

• Ensure that the top and bottom ends of the braces

are under the door flashings as shown in fig.5 and

opposite ends of the braces overlap in the middle.

• Rivet door brace flashings onto back of door as

shown. Where possible, rivet from front of door.

SMALL DOOR:

• Assemble small door in same way as large door using 0.495 m top and bottom flashings.

• Before screwing on 0.915m door braces, attach weather strip flashing to back of door side flashing using six rivets

ensuring it protrudes 20mm out from door side.

fig.1

fig.2

Hinges

fig.5

fig.3

NARROW PANS

fig.4