Duratuf KIWI KL1 Manual de instruções de montagem - Página 9

Procurar online ou descarregar pdf Manual de instruções de montagem para Armazenamento ao ar livre Duratuf KIWI KL1. Duratuf KIWI KL1 16 páginas.

KL1 DOOR JAMB & CORNER FLASHINGS

Step1: Fit Door Jamb Flashing (104) in between

Top and Bottom Plates and hard against

Stud. Attach Door Jamb Flashing with

three rivets into Rib on the outside and

three 30mm clouts into studs on the in-

side. Repeat with the other Door Jamb.

Step3: Measure and cut Doorstep Flashing (106) to

fit in between Door Jambs. Position the Door-

step Flashing in between the Door Jambs at

bottom of doorway, nail through top of flashing

using three 30mm Clouts. Repeat with the

Overdoor Flashing (105).

CLADDING

CORNER

FLASHING

Step 2: On the left hand side of the front wall fit

Corner Flashing (101) over Door Jamb

Flashing and rib . With top of the Corner

Flashing flush with the top of the Top

Plate, rivet in place using six rivets.

Step 4: Fit remaining three Corner Flashings over

corner Ribs and rivet in place using six riv-

ets per flashing. When fitting right hand Cor-

ner Flashing on the front wall, ensure it is

parallel with the Door Jamb.

Step 5: Position Ridge Cover (A109) on Ridge

Beam. While holding straight and square,

nail top of Ridge Cover Flashing to Ridge

Beam using three 30mm clouts. Rivet front

of Ridge Cover to Ribs and Flashings using

seven rivets.

END

PLATE

STUD

FRONT PLATE

DOOR JAMB