Duratuf KIWI MK4C Manual de instruções de montagem - Página 8

Procurar online ou descarregar pdf Manual de instruções de montagem para Armazenamento Duratuf KIWI MK4C. Duratuf KIWI MK4C 18 páginas. Shed

Step 1: Front Wall: Start at the left hand side. Position the

Wall Sheet with the LIP on the left hand side. Ensur-

ing the LIP is flush with side of the Stud and the top of

the Top Plate, tack in place. Repeat with Wall Sheet

on the right hand side of doorway. Ensure Rib without

LIP is on the right hand side of stud then tack in

place. Position 1/2 Wall Sheets as shown in the Clad-

ding Detail and tack in place.

Step 2: Back Wall: Position the first Wall Sheet with

the LIP on the right hand side. Ensuring the LIP

is flush with the side of the Stud and the top of

the Wall Sheet is flush with the top of the Top

Plate, tack in place. Position the next Wall

Sheet with the LIP on the right hand side. Over-

lap as shown in fig.1 (page 7). Ensuring Wall

Sheet is flush with top of Top Plate, tack in

place. Repeat with remaining sheets.

Step 3: End Walls: Lean Gable Wall Sheets against

the shed to form gable shape. With the LIP

flush with side of Stud tack in place ensuring

the bottom of the Wall Sheet is 10mm above

the bottom of the Bottom Plate. Tack on re-

maining Wall Sheets. Repeat with other gable

end. If fitting a window, nail in Window Studs

and Nog now. Refer to Window instructions.

Step 4: Nailing Off: Nail one 30mm Clout each side of the Rib (two per Pan) into the Top Plates and Bottom Plates. Nail

Wall Sheets to mid wall Nogs (one per pan). Nail each corner Wall Sheet to Studs using two 30mm Clouts evenly

spaced.

Gable Ends: When nailing Gable Wall Sheets to the Top Plate, use a String Line. At the top of the gable nail two

30mm Clouts into the end of each Ridge Beam. This will stop it from twisting.

MK4C WALL CLADDING

TOP

FLUSH

EDGE

FLUSH