4-Max Inspiration F3A 50E Manual de instruções de montagem - Página 8

Procurar online ou descarregar pdf Manual de instruções de montagem para Brinquedo 4-Max Inspiration F3A 50E. 4-Max Inspiration F3A 50E 9 páginas.

Step 23

Install the small fuselage wing (canalyzer) to

the top of the fuselage just behind the

canopy using foam safe glue ensure it is fully

seated and square to the fin and parallel to

the horizontal stabilizer.

Step 23

Install the right and left wing on the fuselage

using the carbon fibre tube supplied. Feed

the servo leads through as per the photo.

Step 24

Insert the two wooden wing locking plates

in to the pre-cut slot in the fuselage.

These lock the wings in place.

Tip: Add a bit of tape to one end of the ply

plates to allow you to remove them once

installed.

Step 25

Install the propeller and cooling Spinner to

the motor. Make sure the propeller spins

freely and doesn't touch the plastic nose

cone

www.4-Max.co.uk

Tel: 01256 782 512