Addonics Technologies External USB2.0 Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Invólucro Addonics Technologies External USB2.0. Addonics Technologies External USB2.0 11 páginas. External usb2.0 enclosure

Imprimir página

Create one partition

1. If you pressed Y, the computer will create the partition and then

transfer you back to the beginning screen. From here, select 4 to

inspect to new hard drive's partition.

Create multiple partitions

1. If you pressed N, then you're going to create multiple partitions. To do

this, you'll need to set the size of the new partition. This is done by

entering a value next to "Enter partition size in Mbytes or percent of

disk space to create a Primary DOS Partition."

For example, if your new hard drive is 20GB and you'd like to create

two 10GB drives, entering 50% will do just fine. To enter a number in

Mbytes, take the total number in Mbytes and divide it in half to get the

correct number to input. To make things easier, just use a percentage of

the total hard drive and let your computer do the math for you.

2. When you've finished entering the size of the new partition, hit Enter to

create it.

3. Press Esc to return to the new drives main menu.

4. From here, select 1 to "Create DOS Partition or Logical DOS Drive."

5. Now it's time to create the extended partition. To do this, select 2 from

the menu and hit Enter.

6. A screen that says, "Enter partition size in Mbytes or percent of disk

space to create an Extended DOS Partition" will appear. You should

notice that the computer did the math for you and filled in the

remaining hard drive space to be partitioned. If this number is OK,

press Enter to complete the process. If it's not, and you plan on creating

additional partitions, lower the number accordingly and then press

Enter.

7. After fdisk creates the partition, press Esc to return to the new hard

drive's main menu.

8. Before the new extended partition will work, it needs to have a Logical

DOS Drive created on it. To do this, select 1 on the list to "Create DOS

Partition or Logical DOS Drive."

Addonics Technologies – External USB2.0 Enclosure Users Guide v1.0