Addonics Technologies Zebra ZUSCSU Manual do utilizador - Página 4
Procurar online ou descarregar pdf Manual do utilizador para Invólucro Addonics Technologies Zebra ZUSCSU. Addonics Technologies Zebra ZUSCSU 12 páginas. External usb 2.0 enclosure
Chapter 1
Hardware Installation
Enclosure Overview
Firewire
Connections
Screw 1
Fan
Step 1
Loosen the two screws from the rear panel. Pull out the interior tray from the
enclosure.
Step 2
For Model: AE5IDECSU2 (For IDE hard drive installation)
Note: You need to configure your IDE hard drive as MASTER before using it
with the enclosure. If you are not sure how to configure your hard drive as a
MASTER device, contact your hard drive manufacturer.
40-pin IDE
ribbon cable
Addonics Technologies
Screw 2
Switch
Power
Connector
USB Port
Connect the 4-pin Molex power
cable to the power connector of
the hard drive.
Also connect the 40-pin IDE
ribbon cable (MASTER DEVICE
0) to IDE connector of the hard
drive.
4-pin Molex
power cable
4