APLIC 302759 Manual do utilizador - Página 6

Procurar online ou descarregar pdf Manual do utilizador para Carregador de bateria APLIC 302759. APLIC 302759 20 páginas. 4-bay battery charger

(1 bar ~ 25%). A blinking bar means that the respective charging level has not yet

been reached. A constantly glowing bar indicates that the charging level has been

reached. If the charging process is completed in a battery slot, then this is indicated

using the battery symbol showing four full bars glowing constantly.

Batteries are charged with a charging current of 200mA for AAA type batteries and

with 450mA for AA type batteries. The charging current is automatically selected

by the charger after detecting what type of battery has been inserted.

4. Initial use

Take the device out of the package and remove all the packaging material. Connect

the charger to a properly installed 230V AC socket. You can then insert the desired

type of battery (AA or AAA) into the charger.

Caution! Charge only rechargeable batteries. Please do not use non-rechargeable

batteries!

As soon as one or more batteries are inserted, the power supply unit automatically

detects whether the inserted battery type is AA or AAA and automatically adjusts

the charging current. Please also ensure that the battery type to be charged is

NiMH and not NiCd or any other battery type.

It may be that completely discharged or defective batteries cannot be recharged. In

such cases, the display shows a "BAD" symbol.

During the charging process, the word "CHARGE" is shown in the display. Once the

batteries are completely charged, the word "READY" is shown in the display. You

can then remove the batteries. If required, you can charge more batteries.

5. Cleaning and Maintenance

Disconnect the device from the mains and make sure that it is not carrying any

current. Wipe it using a dry and soft cloth. Please do not use aggressive cleaning

agents.

English