Aplisens CS-27/BAK Manual de instruções - Página 13

Procurar online ou descarregar pdf Manual de instruções para Instrumentos de medição Aplisens CS-27/BAK. Aplisens CS-27/BAK 13 páginas. Hydrostatic fuel level probe for installation on the fuel filler

Imprimir página
10

INSPECTION

10.1 Periodical inspection

Periodical inspection must be conducted according to standards in force.
While inspecting, check the condition of electrical connections on clamps (firmness of
connections) and the stability of device fixing.
.

10.2 Non-periodical inspection

If the device is exposed to mechanical damage, electrical overvoltage or it works improperly
– conduct inspection as necessary.
If there is no signal on the transmission line or signal value is incorrect, check the condition of
the cable, the condition of connections on clamps, etc. Check if the power voltage value and
load resistance is correct.
If the line is functional, check the operation of the device.
11

SCRAPPING, DISPOSAL

Used or damaged devices must be scrapped according to EU Directive (2002/96/EU)
on used electrical and electronic equipment, or returned to the producer.
12

ADDITIONAL INFORMATION

The producer reserves the right to implement structural and technological alterations that do
not impair the device's parameters.
02.B.003
IO.CS-27/W.CS-27/BAK
11