Aplisens SGE-25S.Modbus Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Instrumentos de medição Aplisens SGE-25S.Modbus. Aplisens SGE-25S.Modbus 20 páginas. Smart level probes

Imprimir página

TRANSPORT AND STORAGE

3.1. Delivery check

After receiving the delivery, please refer to the general terms and conditions of contracts available

on the manufacturer website: https://aplisens.com/ogolne_warunki_umow.html.

3.2. Transport

Transport of probes shall be carried out with the use of covered means of transport, in original packages

with diaphragm provided with protection. The packaging shall be protected against movement

and direct impact of atmospheric factors.

3.3. Storage and use

Probes shall be stored in a factory packaging, in a room without vapours and aggressive substances,

protected against mechanical impact. The cable should be coiled into a circle with a diameter

of ≥ 30 cm, the coils of the coil should be fixed in relation to each other and the whole should be fixed

in the package. Avoid kinking the cable at the point where it exits the gland.

Permissible medium temperature range:

SGE-25.MODBUS/ SGE-25S.MODBUS

•

Special version - Teflon

The medium must not be allowed to freeze in the immediate vicinity of the probe.

GUARANTEE

General terms and conditions of guarantee are available on the manufacturer's website:

www.aplisens.com/ogolne_warunki_gwarancji

The guarantee shall be repealed if the device is used against its intended use, failure

to comply with user's manual or interference with the structure of the device.

Revision 01.A.001/2021.09

EN.IO.SGE.25.MODBUS

-25 ... 40°C (-13 ... 104°F);

0 ... 75°C (32 ... 167°F);