Aplisens PCE-28.Smart Manual do utilizador - Página 6
Procurar online ou descarregar pdf Manual do utilizador para Acessórios Aplisens PCE-28.Smart. Aplisens PCE-28.Smart 20 páginas. Pressure transmitters
Imprimir página
IO.PCE-28....PC-29.Exd
2.
SAFETY PROCEDURES
The installation and commissioning of the transmitter and any activities related
to the operation should be performed only after careful examination of the
contents of this manual.
Installation and maintenance should be carried out by qualified personnel
having necessary authorisation to install electrical equipment and measuring
instruments.
The transmitter should be used according to its intended purpose (section 6.1)
with permissible parameters.
Before assembly or disassembly of the transmitter, one must absolutely
disconnect the power source.
Under no circumstances may the electrical system of the transmitter be
repaired or otherwise handled by the user. Damage assessments and repairs
may only be carried out by the manufacturer or its authorised dealer.
Do not use damaged device. If a device is not functioning correctly, disconnect
it.
When using the device in potentially explosive areas, observe technical
requirements specified in this manual and applicable local (national)
regulations.
3.
USER INFORMATION
The user receives together with the transmitter:
a) Product Certificate, which is also a warranty card;
b) Declaration of Conformity;
c) Copy of the certificate (on request);
d) User Manual ref. No. IO.PCE-28...PC-29(ENG).
Items b), c) and d) are available on the website
4.
TRANSPORT AND STORAGE
4.1.
Transport
Transmitters should be transported in multi- or/and single-unit packaging. The packaging
should be protected against displacement and direct weathering effect.
4.2.
Storage
The transmitter should be stored in the original packaging, indoor rooms, free of vapours
and corrosive substances, the temperature and relative humidity should not exceed the
permitted conditions (see individual transmitters data sheet).
4
www.aplisens.com
04.A.004