Aplisens SP-02 Manual do utilizador - Página 5

Procurar online ou descarregar pdf Manual do utilizador para Conversor de multimédia Aplisens SP-02. Aplisens SP-02 16 páginas.

TRANSPORT AND STORAGE

4.1.

When transported, the devices should be packed in individual and/or group packaging and

carried on a covered means of transport. The packaging should be secured against shifting and

atmospheric weather effects.

4.2.

The device should be stored in the manufacturer's packaging, in a covered room, free of vapor

and corrosive agents, where temperature and relative humidity do not exceed maximum

acceptable limits.

The producer provides warranty under the conditions specified in Product Certificate that works

as a warranty card.

Warranty will be void if the device is not used according to its intended use, the user

does not follow this instruction manual, the device is handled by unqualified personnel

or the construction has been tampered with.

CONSTRUCTION

6.1.

Rail-mounted Signal Converters (isolators) are intended to operate in automatic adjustment

systems wherever a galvanic separation of system input or output signal is required. They also

enable to change analogue signals of 0...20mA, 4...20mA, 0...10V. Also, versions with non-

standard analogue signals are available. Moreover, the ZSP-41/2 is installed wherever

additional duplication of output signals is required.

6.2.

All elements of the isolators' electronic systems are installed on a printed circuit board. A front

panel with clamps is welded to the circuit board. The entire set is assembled in housing made of

plastic. Signal converters have switches to selected input and output signals, accessible after

sliding the printed circuit board out of the housing.

03.B.005

IO.ZSP-41.SP-11.SP-02