Apogee Atomizer 05054 Manual de início rápido - Página 7

Procurar online ou descarregar pdf Manual de início rápido para Brinquedo Apogee Atomizer 05054. Apogee Atomizer 05054 8 páginas.

C. When you are ready to launch your rocket, slide

the rocket motor into the engine mount tube until the

engine hook clicks into place as seen below.

D. Insert and secure the engine igniter as directed on

the package the engines came with.

At this point, the assembly of the rocket is complete

and ready for flight. Continue to follow the countdown

and launch procedures.

Countdown and Launch Procedure

The Atomizer rocket flies off of a 1/8" launch rod.

Fly your rocket on a large field that is far from any

power lines, trees, or low flying aircraft. The larger

the field, the greater your chances of recovering your

rocket. The launch area around the pad must be free

of dry weeds and brown grass. Launch only during

calm weather with very little or no wind and good

visibility.

10. Remove the safety key from the launch control-

ler.

9. Slide the rail buttons over the launch rail to place the

rocket on the pad. The rocket should slide freely along

the launch rod.

8. Attach the micro-clips to the igniter wires.

The clips must not touch each other or the metal blast

deflector.

7. Stand back from your rocket as far as the launch

wire allows (at least 40 feet for E motors and larger).

6. Insert the safety key to arm the launch system. The

light (or buzzer) on the controller should come on.

Give a loud countdown! 5... 4... 3... 2... 1...

LAUNCH!

Push and hold the button until the engine ignites. Then

remove the safety key and place the safety cap on the

launch Rod.

Step C

Step D

overlap

Launch Lug

Tube Marking Guide

Page 7