Abus SHRM10000 Instruções de funcionamento originais - Página 13
Procurar online ou descarregar pdf Instruções de funcionamento originais para Alarme de fumo Abus SHRM10000. Abus SHRM10000 16 páginas. Z-wave smoke detector
Imprimir página
C
5.3.
Exclusion / Remove device
A
B
Check the functionality of the smoke alarm
device by pressing the Test button. The
warning tone signals and the red "ALARM"
LED flashes quickly
This does not indicate that smoke is present
in the air in the room; it is a confirmation that
the smoke alarm device is functioning
properly.
Click the - (Remove) button in your Z-Wave
App and follow the further instructions
Press the Network-button 3 times within 1.5
seconds and the Status-LED on the base unit
front will flash 3 times
The App will show if the Remove device
process was successful and the Status-LED
on device will flash 6 times
Repeat the exclusion process from step A if it
was not successful.
13
English