Apollo Xpander XPA-IN-14102-APO Manual de instalação - Página 2
Procurar online ou descarregar pdf Manual de instalação para Sensores de segurança Apollo Xpander XPA-IN-14102-APO. Apollo Xpander XPA-IN-14102-APO 2 páginas. Remote indicator module
Também para Apollo Xpander XPA-IN-14102-APO: Manual de colocação em funcionamento (14 páginas)
Imprimir página
Fig. 1 Back Plate, Fixing Screw & Removal Slot
XPERT Card Insertion and Removal
Removal requires access to the inside of the Remote Indicator Module. Detatch the front
cover by removing the two front assembly retaining screws allowing access to the PCB.
Insert a flat-blade screwdriver just inside the bottom edge of the RIM above the XPERT card
and disengage the card retaining clip whilst pulling the XPERT card out.
Battery Type
a P
a n
o s
n
c i
6 x AA 1.5V Alkaline Panasonic Powerline (Size M, LR6)
When replacing batteries, allow the device to power down for a period of two minutes
before installing replacements.
Note: When replacement batteries are required all batteries must be replaced together.
Technical Data
Operating voltage
2.8-5Vdc
Operating temperature
–10°C to +50°C
Fig. 2 Mounting Holes
V
r a
a t
6 x AA 1.5V Alkaline Varta Industrial (4006, LR6)
2
XPERT Card Addressing
The XPander XPERT card is specifi cally designed for XPander products and has profi led
address pips for ease of installation. The use of standard XPERT cards is not recommended.
Select the desired address and remove the pips indicated in black. Remove pips with a
small screwdriver.
3