Apollo Sprayers MAXI-MISER PBC7600-GTO Manual de instruções - Página 13

Procurar online ou descarregar pdf Manual de instruções para Pulverizador de tinta Apollo Sprayers MAXI-MISER PBC7600-GTO. Apollo Sprayers MAXI-MISER PBC7600-GTO 20 páginas.

Imprimir página

6. Push the needle (#21) back into the spray gun.

7. Insert the Needle spring into the Material Adjustment Screw (#19).

8. Install the Material Adjustment Screw with Needle Spring (#20).

Periodically, use Apollo lubricant to lubricate the air valve bushing as shown.

Pressure will remain in the spray cup when unit is off. If you pull the trigger back, a stream of fluid

will flow. To prevent accidents, turn material flow screw clockwise until it is completely closed. The

trigger is now locked in the closed position.

To relief the cup pressure prior to opening the cup use the twist connector located between the

check valve and the cup lid. Undo the connector and the air pressure will exhaust through the tube.

If you don't relieve the air pressure prior to opening the lid on the cup, paint can fly out and down

the side of the cup.

Install air cap and air cap ring. Spray gun is now re-assembled and ready to use.