Daspi MACH 6E Manual - Página 3

Procurar online ou descarregar pdf Manual para Abertura de porta de garagem Daspi MACH 6E. Daspi MACH 6E 7 páginas. Control panel for sliding gates

Imprimir página

Ingresso pulsante pedonale, apre parzialmente il

cancello(per circa 7 sec.) contatto N.O.

Ingresso pulsante START se premuto durante la

fase di apertura ferma la manovra,durante la

chiusura inverte il movimento.Contatto N.O.

Ingresso pulsante STOP se premuto ferma

qualunque manovra e annulla la richiusura

automaticaContatto N.C.

Uscita secondo canale radio, contatto N.O. pulito (portata, vedi caratteristiche del ricevitore)

Collaudo

Da eseguire con il cancello a metà della sua corsa e solo dopo aver installato tutti i dispositivi di sicurezza previsti dalle

normative vigenti al fine di ridurre al minimo ogni rischio

•

Verificare il corretto collegamento del motore tenendo presente che la prima manovra che la scheda esegue una volta alimentata

è un apertura se questo non avviene invertire i collegamenti ai morsetti 6-7

•

Verificare il corretto funzionamento dei finecorsa movendo manualmente la leva e controllando che si spenga il led corrispondente

in caso contrario invertire i collegamenti ai morsetti 17-18

•

Verificare il corretto funzionamento di tutti i dispositivi di sicurezza installati al fine di ridurre al minimo ogni eventuale rischio.

•

Istruire il personale addetto all'uso dell'automazione sui relativi comandi, dispositivi di sicurezza e pericolosità derivante dall'uso

dell'automazione.

•

Compilare il fascicolo tecnico ed adempiere agli eventuali obblighi derivanti dalle normative vigenti.

Safety rules

Warning: Any repairing, fitting or adjustment made from people not qualified is strictly forbidden and in order to avoid any possible

accident, all necessary precautions must been taken (ex: switch off the power supply as well as disconnect batteries). Daspi is not

responsible for possible damages or injuries to people, objects or animals caused by any unauthorized modification of product. Do not

install this product into an explosive place

Keep scrupulously this booklet and include it into the main user manual in a suitable place well known by all the interested people.

Model

The control panel MACH6E has been designed for driving 1 operator for sliding gates mod. BIG FOOT and it has an electric clutch

and electronic brake. Daspi is not responsible for any different use of control panel MACH6E

Main components

Power supply fuse10A

Control fuse 2A

Flashing light fuse 2A

SW1

Dip-switch for the control panel programming

Led showing the control panel's connections (to be checked after turning on the power supply)

DL1

It shows the manoeuvre of the gate (1 flashing/sec. while opening, fix light with the gate completely open, 2 flashing/sec. while

closing)

DL2

Always off, it turns on with control PED(pedestrian) DL5

DL3

Always off, it turns on with control START

DL4

Always on, it turns off with control STOP

Check again the connections and the devices if the above led don't correspond.

Control panel programming and set up

The programming of dip switches must be made with control panel switched off

SW1

It sets the automatic shutting, adjustable by trimmer BREAK

It doesn't accept any other control START while opening

(residential system)

Pre-flashing of 2 seconds before any movement

It sets the feature "close immediately" (trimmer BREAK must be

more than 0) working only while opening.

With the dip residential system ON, if photocells detect

something , as soon as the gate open completely it closes

immediately, only if the photocells are freed.

With the dip residential system OFF, if photocells detect

something , as soon as the entrance is freed, the gate starts

closing after 2 seconds.

Separate entrances OPEN - CLOSE:

the entrance START becomes OPEN and the entrance PED

(pedestrian) becomes CLOSE.

Photocells working while opening. As soon as they are freed,

the gate keep opening.

JP1

JP2

JP3

DL6

DL7

DL8

Uscita 24Vac per alimentare i dispositivi esterni come le

fotocellule

Uscita spia cancello aperto(22=+24Vdc 23=gnd massimo

30mA) segue il funzionamento del led DL1

Ingresso antenna collegare al morsetto 25 il polo caldo

dell'antenna e al morsetto 24 la calza dell'antenna

Terminal for power supply connection 230 Vca 50 Hz

Terminal for connecting the motor, the light and 2° capacitor

Terminal for connecting the safety and control devices

Radio receiver connector

Always on, it turns off with control PHOTOCELLS

Always on, it turns off with control SEFETY DEVICE

Always on, it turns off with control LIMIT SWITCH OPENING

Always on, it turns off with control LIMIT SWITCH CLOSING

Automatic shutting off.

Control START is accepted while the gate is opening. Gate

stops.

Pre-flashing off

"Close immediately" off

Normal working

Photocells working only while closing. If they detect

something, the gate stops and re-opens.

OFF