Düren tools 321275 Manual de instruções - Página 7

Procurar online ou descarregar pdf Manual de instruções para Lixadeira Düren tools 321275. Düren tools 321275 7 páginas. Air operated 10mm belt sander

Imprimir página
PLEASE KEEP THIS MANUAL SAFE FOR FUTURE REFERENCE
625627
321275
Instruction Manual
4
It is strongly advised that you always use a Whip Hose/Leader Hose in combination with
Quick Release Couplings. See Fig. 2 for recommended setup.
5
Water in the air supply will cause the internal bearing of the tool to rust and eventually

Declaration of Conformity

seize.
6
Make sure that your airline is free from water at all times.
We declare that the equipment detail below, to the best of our knowledge and
7
Always select the correct sanding disc grit for the job.
ability, complies with the following Directive.
Tools Included with your Sander
Machinery Directive - 2006/42/EC and amending Directives
Equipment Description
Part Code
Distributed in the EU by
Address
1 x High Flow Male Air Fitting
Maintenance
1
If the air supply is not lubricated sufficiently it will be necessary to lubricate the tool
The following Transposed Harmonised Standards have been applied in the
directly. This can be done by disconnecting the air hose and pouring in 5ml of air tool oil
design and construction of this equipment:
into the Air Inlet. Read safety data sheet or instructions on use of oil to ensure safe
usage. These can be obtained from your supplier.
2
Replace worn or damaged parts using genuine parts only.
The manufacturer and the distributor, stated above, hold the Technical Construction File for this
3
Store tool in a dry area, do not allow tool to be immerse in water or used/stored in wet
equipment.
conditions.
EN ISO 11148-8:2011 Part 8: Hand held non – electrical power tools- safety requirements –
sanders and polishers
Signed on behalf of the distributor
(the responsible person)
Name:
Brian Moffitt
Position:
Director
30/11/17, Dunstable, UK
Date and Place:
01/03/16, Dunstable, UK
Please look after the environment, dispose of all packaging in a responsible way.
Always dispose of tools in accordance with local authority guidelines.
© 2016 Fast Mover Tools Ltd. This document is copyright and is not to be copied, circulated, distributed or shown
to anyone other than the intended recipient without the express permission of Fast Mover Tools.
10mm Belt Sander
75mm Palm Sander
321275
625627
Fast Mover Tools Ltd
Unit 1 Frenchs Avenue
Dunstable
Bedfordshire
LU6 1BH
United Kingdom
................................................
Duren Tools
T: 01582 484875 E: [email protected]
www.duren.co.uk
Duren Tools
T: 01582 484875 E: [email protected]