AddSecure IRIS-4 160 Manual de instalação e manutenção rápidas - Página 3

Procurar online ou descarregar pdf Manual de instalação e manutenção rápidas para Sistema de segurança AddSecure IRIS-4 160. AddSecure IRIS-4 160 11 páginas.

Imprimir página
IRIS-4 160
Quick Installation and
Maintenance Guide

3. PaCkage ContentS

Contents:
• Dialler board in plastic housing
• 3 x screws and plugs for fixing the housing to a flat surface
• 2 x screws and washers for fixing PCB to plastics
• Ethernet cable
• 18k Ohms sense resistor for dial capture tamper detection

4. BoaRD ConFIguRatIon

16
15
14
① = Release clip
② = Sense
③ = DC power
④ = Micro USB
⑤ = Serial (TTL)
⑥ = RS485
⑦ = RS232
⑧ = Relays
⑨ = Dial capture port
screw terminals
⑩ = Pin inputs
⑪
= AP Button
⑫ = Ethernet
⑬ = Battery case
⑭ = SIM card holder
⑮ = 4G/3G/2G antenna
⑯ = SYS LED
1
2
Due to the lack of space on this page, I suggest putting
LeD InDICatIon-tabell into another suitable location.
I suggest on page 15.
4
13
12
3
4
5
6
7
8
9

5. BeFoRe You StaRt

Monitoring Centre (aRC)
Make sure that the monitoring centre to which the IRIS-4 160 device will send alarm signals is equipped with
the appropriate IRIS Secure Apps receiving system . The following information should be obtain from the
Monitoring Centre .
Dialler account number:
Monitoring centre IP address:
ethernet Connection Details
The customer's Ethernet (LAN) network details are required in order to connect the IRIS-4 160 .
Obtain the following information from the customer .
Fixed IP address or DHCP:
IP address:
Gateway address:
Subnet mask address:
Wi-Fi Connection Details
The customer's Wi-Fi network details are required in order to connect the IRIS-4 160 and the configuration
device (e . g . Smart Phone) . Obtain the following information from the customer .
Network name (SSID):
Security type:
11
(WEP/WPA/WPA2)
1
4g/3g/2g SIM Card and access Point name
If the installation uses 4G/3G/2G then a SIM card will be required . The IRIS-4 160 will also need to be given
a 4G/3G/2G 'Access Point Name' (APN) and other possible configurations as shown below . Obtain these from
the SIM card provider .
Access Point Name (APN):
10
User name (USR):
Password (PWD):
Fixed
If using DHCP then the following information will not be required
as it will be assigned by the network.
Password:
SIM Pin:
IRIS-4 160
DHCP
5