4EVAC 4E-CMP Manual de instalação e do utilizador - Página 3

Procurar online ou descarregar pdf Manual de instalação e do utilizador para Sistema de microfone 4EVAC 4E-CMP. 4EVAC 4E-CMP 11 páginas. Push-button microphone station for the compact 500 voice evacuation system

Imprimir página

Hacousto Holland bv

Industrieweg 87

2651BC Berkel & Rodenrijs

4E-CMP installation and user guide

Thank you for choosing 4EVAC as your Voice Evacuation System solution.

4EVAC Compact 500 is an all-in-one Voice Evacuation System box. The box contains a completely

integrated Voice Evacuation System, capable of both standalone and network operation. 4EVAC Compact

500 is certified in accordance with EN54-16 and EN54-4, which are harmonized standards under the

Construction Products Regulation, mandatory in the European Union.

1. What is the 4E-CMP?

4E-CMP is a desktop or wall mounted microphone paging station with

pushbutton panel. It can address up to 6 zones for general purpose paging. 4E-

CMP includes a gooseneck microphone and dedicated TALK button, which can

operate in PTT or toggle mode.

4E-CMP is connected to the L-Net interface of the Compact 500 main unit and

may be daisy-chained with more L-Net devices. 4E-CMP is dedicated to general

purpose / commercial paging and does not offer fault monitoring or EVAC

functionality, thus is not suitable as an emergency microphone.

2. Where do I start?

First, make sure that you are officially allowed to access the hardware of Compact 500 system devices. This

is usually the case if:

you are an authorized representative of 4EVAC;

you have been trained by 4EVAC or one its authorized representatives for installation, service and

commissioning of the Compact 500 Voice Evacuation System.

Unauthorized hardware and/or software modifications are against the law and outside of the

manufacturer's responsibility. If you have doubts about your status and access level permissions, please

contact the 4EVAC main office.

Important note: Access level 3 explanation

Opening the device housing or tampering with the network cabling is

restricted. This gives access to all interfaces, internal system

connections and sensitive hardware settings that are of high

importance to system operation mode, hardware reliability and safety

(Access Level 3 according to EN54-16, Annex A). This access level (and

higher) is strictly protected by the manufacturer and reserved only for

service personnel which is trained, approved and officially certified by

the manufacturer. Any actions carried out in Access Level 3 without the

manufacturer's explicit approval may lead to incorrect settings or

hardware damage, causing serious system malfunction, and therefore

are strictly prohibited and void manufacturer's warranty.

Page 3 of 11

Author: