AddSecure Tor V Manual de instalação - Página 17
Procurar online ou descarregar pdf Manual de instalação para Transmissor AddSecure Tor V. AddSecure Tor V 20 páginas. Alarm transmitter
Imprimir página
APPENDIX – STATUS INDICATORS FOR TOR V
When powering up from an absence of voltage and before the tamper spring is
pushed down, table 1 applies. After the spring is pushed down and the signal
strength has been shown, table 2 applies. When warm booting the transmitter, the
signal strength is not displayed and table 2 applies directly.
LED function during power-up
1.
LED A blinks at start. Other LEDs are off.
2.
When the alarm transmitter has contact with the mobile network, LED A's light is
solid.
3.
If the alarm transmitter does not have contact with the mobile network or if the signal
strength cannot be measured, LED D blinks quickly.
4.
The diodes indicate the signal strength of the mobile data network; see Table 1.
5.
To return to normal mode, push down the opening tamper switch for five seconds or
put on the cover so that the switch for the opening tamper is pushed down.
6.
The LEDs display as normal no matter whether the interference protection is affected.
Table 1 (signal strength).
Indicator
Status
LED A
On
LED B
On
LED C
On
LED D
On
LED D
Blinking
quickly
Table 2 (normal display).
LED A (Green)
Mode
Description
Off
Indicates that the alarm transmitter does not have power.
Double blinking
Indicates that the alarm transmitter does not have a mobile module or is in the process of
starting up.
Blinking
The alarm transmitter has no contact with the mobile operator.
Solid
The alarm transmitter is connected to a mobile operator.
LED B (Yellow)
Mode
Description
Off
Not used.
LED C (Red)
Mode
Description
Off
The alarm transmitter has no contact with the alarm service via mobile data.
Blinking
The alarm transmitter has contact via the EDGE service.
Solid
The alarm transmitter has contact with the service via GPRS.
LED D (Red)
Mode
Description
Off
The alarm transmitter has no outstanding alarms.
Solid
The alarm transmitter has outstanding alarms.
Signal strength
Satisfactory
>25
Yes
20–25
Yes
14–19
Yes
0–13
No
Cannot be measured
No
AddSecure Tor V, PDK-11606
LED color
Green
Yellow
Red
Red
Red
17