Durite 0-875-15 Manual de instalação e do utilizador - Página 7
Procurar online ou descarregar pdf Manual de instalação e do utilizador para Câmara digital Durite 0-875-15. Durite 0-875-15 14 páginas.
Imprimir página
OperaDon
Commissioning your Incident Camera
Amer installaDon, contact your support centre to confirm operaDon and file upload. For Durite
customers, this will always be the Durite Support desk (0330 995 1995). All issues must be
reported to the Durite Support team at the Dme of installaDon.
Take care not to trigger mulDple panic videos or crash videos, as this may cause undue delay during
commissioning. It is good pracDce to complete the installaDon with the baUery +12V fuse removed
unDl all units are secured. This will ensure the process is more efficient.
You support centre will expect to see a video from the camera on the Durite telematics portal, and
will talk you through any faults which may have occurred during installaDon. Be prepared to revisit
parts of your installaDon during commissioning, if requested by your support centre.
Incident Cam | Installation & User Guide
7
If correctly installed, the control unit will
power up when the vehicle's igniDon is
turned on. A blue LED will display adjacent
to the control unit's POWER socket. Each
installed camera will also display a small
blue LED. The unit will remain powered for
up to ten minutes amer the igniDon has been
turned off.
When powered, the WiFi dongle will display
two LEDs: blue and green. In order for the
Incident Camera system to funcDon
correctly, both blue and green LEDs need to
be illuminated conDnually. When the
vehicle's igniDon is started, it may take up to
one minute for both lights to illuminate as
the dongle goes through its boot process
and aUempts to make a connecDon.
If any other light paUern shows, you will be
unable to commission your system. Ensure
that you are located in an area with a good
3G data signal. If not, endeavour to move
the locaDon to one.
of
9