DURKOPP ADLER 806 Manual de instruções de instalação - Página 16

Procurar online ou descarregar pdf Manual de instruções de instalação para Acessórios para máquinas de costura DURKOPP ADLER 806. DURKOPP ADLER 806 19 páginas.

Imprimir página

DURKOPP ADLER 806 Manual de instruções de instalação

7.4.2 Position balancing

X =

Y =

X =

Y =

X =

Y =

Note:

The sticker on the machine shows the coordinates of the positions

existing at the moment of machine delivery. The symbols on the sticker

correspond to those presented in the display when balancing the

positions.

By means of the functions " Position balancing ", the balancing of the

important positions of the transfer carriage will be carried out in the

following sequence :

–

Read-in the position balancing for coding

–

Position balancing for the upper sewing position

–

Position control for the lower sewing position

–

Position balancing for the beading station

After having carried out the position balancing, you can release by the

keys F1 - F4 following functions:

Lifting/lowering the transfer plate

This permits to lower and to lift the transfer plate when the sewing

head stands in its upper position.

Lifting/lowering the sewing head

This permits to lower and to lift the sewing head when transfer plate is

in its lowered position.

NOTE !

The needle bar should not stand above the transfer plate mechanism

when the sewing head is in its lowered position.

Step value 2

Set the step here to the value 2 (0,2 mm). The transfer plate will be

displaced by this value each time you press the arrow key..

Step value 10

Set the step here to the value 10 (1 mm). The transfer plate will be

displaced by this value each time you press the arrow key.