DURKOPP ADLER Kit 0367 595084 Instruções - Página 3
Procurar online ou descarregar pdf Instruções para Acessórios para máquinas de costura DURKOPP ADLER Kit 0367 595084. DURKOPP ADLER Kit 0367 595084 4 páginas. Instructions for converting for manual backtacking
Imprimir página
Instructions for converting for manual backtacking
1.
Use of the set of parts
The following subclasses of cl. 367 can be retrofitted with the set of parts "manual backtacking":
-170115, -170315, -180115, -180315.
2.
Scope of delivery:
Before you start with the conversion: Please check whether all components of the retrofit kit are
included in the delivery.
The kit consists of the following components:
–
1 x belt cover
–
1 x tension spring
–
1 x lever
–
2 x oval head screws
–
1 x block
–
1 x half length taper grooved pin
–
1 x grooved cylindrical pin
–
1 x hose
–
1 x shaft
–
1 x drilling template
–
1 x handle
3.
Conversion of the machine
8
–
Remove synchronizer and handwheel.
–
Remove belt protection.
–
Remove valve cover.
–
Check whether the shaft 0367 166020 has to be replaced by the included one. The protrusion of the
shaft 1 must amount to approx. 12 mm.
–
Loosen the pressure screws at block 12 and lever 11 (0667 16374 with cl. 367-170315, -180315
only).
Ausgabe/Edition:
01. 2006
Umbauanleitung für Handverriegelung
Teilesatz 0367 595084
Kit 0367 595084
0667 100040
0667 165220
0367 165960
9204 201667
0367 166003
0578 000868
0994 271360
0367 165980
0367 166020
0367 165990
0667 165570
Caution: Risk of injury !
Switch the main switch off and unplug the mains plug before you start
mounting the kit for manual backtacking. The assembly must be done by
qualified technicians only.
1
7
Printed in Federal Republic of Germany
10
1
Teile-Nr./ Part-No.:
0791 367770
7
11
12
Blatt:
von
Sheet: 3
from 4