4Gamers CP-PRO Manual - Página 3

Procurar online ou descarregar pdf Manual para Auscultadores 4Gamers CP-PRO. 4Gamers CP-PRO 14 páginas. For ps3

Imprimir página
Setting up your PS3™ system
Chat Settings
So that you can hear other players you must setup your PS3™ system as
follows:
1. Turn on your PS3™; go to "Settings" > "Accessory Settings" > "Audio
Device Settings".
2. Select "Input Device" and select "4Gamers Official USB Headset"
from the options.
3. Select "Output Device" and select "4Gamers Official USB Headset"
from the options.
4. Select "Microphone Level" and adjust so that the on screen audio
indicator bar just reaches the red area when you speak loudly, we
suggest microphone level 3. If you select a level that is too high you may
encounter feedback from noise around you.
5. Click "OK" to save.
Audio Device Settings
Microphone Level 3
Input Device
4Gamers Official USB Headset
Output Device
4Gamers Official USB Headset
OK
X Enter
O Back
Audio Setting
So that you can hear the game audio in the headset, you must make sure
that your system is setup as follows:
1. Turn on your PS3™, go to "Settings" > "Sound Settings" > "Audio Output
settings".
2. Select "Audio Input Connector / SCART / AV Multi" to send the audio
output to the headset.
3. Press "X" to save this setting.
Audio Output Settings
Select the connector on the TV or AV amplifier (receiver).
HDMI
Optical Digital
Audio Input Connector / SCART / AV MULTI
Turn on the power of the connected device
O Cancel
If you are using the PS3™'s HDMI or digital (optical) output to send audio
to your TV then skip steps 1 to 3 above and Select the "Audio Multi Output"
on your PS3™. "Settings" > "Sound Settings" > "Audio Multi-Output".
This will allow you to output the systems audio via the standard PS3™ AV
cable and an HDMI cable at the same time.
Audio Multi -Output
On
Sets to outpu audio through multiple connectors simultaneously. Audio
output to connectors that are not selected in [Audio Output Settings] is
downscaled to 2Ch.
Inline Control Unit/Amplifier
Frequently Asked Questions
Q: No one can hear me speaking
A: - Ensure you have the Mic Mute switch set to its OFF position
- Move the Microphone closer to your mouth
- Try setting the Microphone level on your system to a higher level
- Ensure you have selected "4Gamers Official USB Headset" in the
systems chat settings
Q: I can't hear any Game or Chat sounds through the headset
A: - Ensure that you have turned the dual inline volume controls up
- Check the audio settings on your system
Technical Specification
Driver Size:
Frequency response:
Impedance:
Sensitivity:
Maximum input power:
OFC Cable:
Cable Length:
Recycling
This product should not be disposed of in normal household rubbish.
Please take it to a collection point for the disposal of Waste Electrical and
Electronic Equipment (WEEE) for recycling.
The recycling and processing of Waste Electrical and Electronic
Equipment will make a significant contribution towards helping protect
the environment by reduced landfill waste.
00/00 0:00
GAME
CHAT
MIC MUTE
40mm Driver
20-20,000Hz
32 ohms
108 dB
0.1W
Yes
4 Metres
Helpline Information
The Helpline is a live one-to-one service
Hours:
10:00 am till 5:00pm, Monday to Thursday
10:00 am till 4:00pm, Friday
UK: Tel 0870 609 1080 (All calls charged at national rate)
Eire: Tel +44 1204 369233 (All calls charged at international rate)
Web: www.accessories4technology.com
To ensure that your call is handled quickly and effectively please
ensure that you have the model number, CP-PRO and any other relevant
information regarding your product to hand when you ring.
MADE IN CHINA