4IPNET EAP738 Manual - Página 10

Procurar online ou descarregar pdf Manual para Ponto de acesso sem fios 4IPNET EAP738. 4IPNET EAP738 19 páginas. Enterprise access point

2. Connect EAP738 to your network device.

Connect one end of the Ethernet cable to the Uplink (PoE) port of EAP738 and the other end of the cable to a

switch, a router, or a hub. EAP738 is then connected to your existing wired LAN network.

3. Power on EAP738.

There are two ways to supply power over to EAP738.

- EAP738 Uplink port is capable of receiving DC currents. Connect an IEEE 802.3af-compliant PSE

device (e.g. a PoE-switch) to the Uplink port of EAP738 with the Ethernet cable.

- Connect a 12V/1A adaptor to the DC power jack. If needed.

Now, the Hardware Installation is complete.

x Using a different power adapter may damage this system.

x To verify the wired connection between EAP738 and you switch / router / hub, please also

check the LED indicator of the respective network devices.

EAP738 Enterprise Access Point

H H andbook

ENGLISH