ELRO CC60RIP11S Manual de início rápido - Página 4

Procurar online ou descarregar pdf Manual de início rápido para Câmara IP ELRO CC60RIP11S. ELRO CC60RIP11S 6 páginas. Color night vision

Internet Connection

Make sure your smart phone or tablet is connected to the same local WiFi network (which the camera is using)

and the power LED of the camera is in fast flash mode!

Enter the ELRO Color Night Vision IP Cam app, press"+" in the upper right corner to add camera, and go to smart

config. The app will automatically be in the local WiFi network and you need to input the WiFi networks

password and than klick "next".

In the following screen, the app should have found your camera and the DID is shown. Now please enter the

camera password, which is in factory setting "000000"

IOS Input screen

Android Input screen

Notice: At the first time you add a camera, to make the camera password more secure, you will be forced to

change the password. Enter the new password twice (8-16 alphanumeric characters), and "Save" your password.

Refresh and reset the camera

To refresh the camera (i.e. if WiFi connection gets lost), just press the screen and pull down.

You can reset the camera to factory defaults when it is not successful. Press the reset button once, the LED

changes to bright green, then press the camera reset button for more than 5 seconds and the camera changes to

default factory mode, the power LED then goes into fast flash mode.