Durst M 670 COLOR Manual de instruções - Página 14
Procurar online ou descarregar pdf Manual de instruções para Lupas Durst M 670 COLOR. Durst M 670 COLOR 16 páginas.
Imprimir página- - - - 1 5
-----26
27
spigot on the lamp reflector points down and engages.
Correct seating of the lamp in the lamp holder is important
as this automatically centres the lamp and ensures even
illumination. Never touch the inside surface of the lamp
reflector (28) with your fingers.
Place the colour mixing head complete with lamp over the
enlarger head and secure with the two milled screws
(24).
Fit the mixing box
(17) supplied underneath the colour
mixing head with the two milled screws
(25). Slack off the
screws. insert the mixing box with its two cutouts under the
screws
(25) and secure the latter.
Push the negative carrier into the opening provided for
it
on
the enlarger head. plug the lead from the colour mixing head
into the socket of the transformer or voltage stabiliser and
plug the latter into an exposure timer.
Black-and-white conversion kit for enlarging 6 x 7 cm films
with the Ourst M 670 BW
To enlarge
6X7 cm (2
1
/.
X 2
3
/.
in.) films in the Ourst M
670 SW
you need a speCial conversion kit (Order code VEGASET
67.
available separately). consisting of the following:
- Double condenser for 6
x
7 cm films
Upper anti-Newton coated negative carrier glass
Lower glassless metal mask for
6X7 cm film
- Lens tube to take a
100/105 mm lens
- Filter drawer with two glasses
- Extensive arm for red filter holder.
With this conversion kit you can enlarge 6 X 7 cm films. using
an anti-Newton coated glass in the top and a glassless format
mask in the bottom of the negative carrier.
If you have the VEGASET
67 conversion kit for 6 X 7 cm films
and want to enlarge
4.5x6 cm (1
3
/.X2
1 /.
in.) and
6X6 cm
(2
1
/.
X 2
1
/.
in.) films, you need the .further accessories listed
in the chart on page
15.
Note: When you enlarge 6X7 cm films in the Ourst M 670 SW.
replace the standard filter drawer by that of the VEGASET
67.
Insert the VEGATUS 39 lens tube into the lens carrier so
as to bring the lens nearer to the projection plane.
To use a red filter replace the standard red filter holder by the
special 6 X 7 cm red filter holder
(45).
17