Elsema Gigalink GLR2708 Instruções de configuração e programação - Página 3
Procurar online ou descarregar pdf Instruções de configuração e programação para Recetor Elsema Gigalink GLR2708. Elsema Gigalink GLR2708 8 páginas. 8-channel 27mhz receiver with open collector outputs
Também para Elsema Gigalink GLR2708: Manual (7 páginas)
Imprimir página
GLR43308 and GLR2708
Setup and programming instructions for the 8 channel Gigalink
FEATURES
› Eight channel receiver with 8 open collector outputs
› Supply voltage can be AC or DC
› Low current consumption
› Over 4 billion code combinations
› Crystal controlled for high reliability
› Can store unlimited number of transmitters
› Uses micro-controller technology that can be re-programmed to suit unique applications
› Momentary, latching and security latching modes are all user selectable
› Optional QM100 bracket available for easy mounting to cases or walls
› E version receiver available with a weatherproof case
DESCRIPTION
This Gigalink
receiver gives you eight open collector outputs switching to ground with a capacity of 125mA 40
™
VDC each. Each open collector output is protected with a diode to stop any EMF from getting to the receiver.
The receiver's micro-controller can store unlimited number of transmitters with a high security level using the
encrypted 32-bit digital code. Included with the receiver is the Gigalink™ programming cable.
TECHNICAL DATA
Supply Voltage
Frequencies for GLR43308
Frequency for GLR2708
Output
Antenna
Compatible Transmitters
Enter the World of Wireless
11.0 - 28 VDC, 10.0 - 28 VAC. Can use Elsema DC or AC power supply, 12PP1000
or 24PP.
433.920 (Standard), 433.664, 433.408, 433.152MHz
27.195MHz
Eight open collector outputs.
ANT433 series (433MHz Series) or ANT27 series (27MHz Series)
GLT433 MHz series, GLT27 MHz series
receiver
™
3