Elsema FMT-404WNL Manual - Página 4

Procurar online ou descarregar pdf Manual para Transmissor Elsema FMT-404WNL. Elsema FMT-404WNL 6 páginas. High powered, handheld 27mhz remote control digital transmitter with led

Imprimir página
Elsema FMT-404WNL Manual
ELSEMA
High Powered, Handheld 27MHz Remote Control Digital Transmitter – FMT-401, FMT-402, FMT-404
Using FMT-402 and FMT-404
To Use FMT-402 with a 2 channel receiver, and FMT-404 with a 4 channel receiver, just match the 10 way
dip switch on the transmitter to the receiver.
Using 2 Different Receivers with FMT-402
FMT-402 can also be used with 2 different single channel receivers e.g. FMR-212.
Make sure the 10 way dip switch on the transmitter board matches the first 10 dip switches on the receiver.
Set the receivers dip switch 11 and 12 as described below.
When Button A is pressed, dip Switch 11 is transmitted as "ON" (Dip switch 11 on the Receiver is up)
When Button B is pressed, dip Switch 11 is transmitted as "OFF" (Dip switch 11 on the Receiver is down)
When wire link is connected (Factory default), dip switch 12 is "ON" (Dip switch 12 on the Receiver is up)
When wire link is disconnected (cut), dip switch 12 is "OFF" (Dip switch 12 on the Receiver is down).
(see picture below for the location of the wire link)
- 4 -