Cayin HA-6A Manual do utilizador - Página 9
Procurar online ou descarregar pdf Manual do utilizador para Amplificador Cayin HA-6A. Cayin HA-6A 18 páginas. Headphone amplifier
Imprimir página
Front Panel Functional Description
4 . 4
B A L .
4
S T D
PIN B A L .
POWER
P H O N E S
4.4
ON
OFF
S TA N D A R D
B A L A N C E
1 2
3
4 5
①.
Power On/Off: Turn on and off the amplifier. Press
"down" the button to turn on the amplifier, Press
again the button will resume to original position and
the amplifier will power off.
②.
Power Indicator
: Indicate the working status: The
indicator will remain always on when the amplifier is
in regular operation
③.Headphone Output Selector:
can select the suitable type of headphone
output. HA-6A offers three types output.
④.STANDARD: Output for headphones terminated in
6.35mm TRS connector
⑤.4.4 Balance Output：4.4 balance output for
headphone terminated in 4.4mm connector.
⑥.4PIN BALANCE: Output for headphones
terminated in 4pins XLR connector
Attention:
◆
If your want to connect a 3.5mm terminated headphone to the amplifier, you need a 3.5mm to 6.3mm
adapter (not included in the package).
◆Listening through headphones at a high volume for extended periods of time can result in hearing
impairments.
◆Please do not use mono (TS) phone plug with this amplifier as this might cause serious damage
such as short circuit in the amplifier.
◆Please unplug the power plug from AC power circuit if the amplifier is not used for a long time
M
L
H
I M P E D A N C E
4
P I N B A L A N C E
6
HEADPHONE AMPLIFIER HA-
A
6
7
8
Diagram 1：HA-6A Front Panel
With the switch you
V O L U M E
X L R
RCA
S O U R C E S
TR
UL
TR UL
/
M I N
M A X
9 10
11
12
⑦.
IMPEDANCE: Select the most desirable: impedance-
matched output from the amplifier, three options were
offered: (L:8~64Ω; M:65~250Ω; H: 251~600Ω)
⑧.
VU meter: monitor output level of the amplifier
⑨.
Triode/ Ultralinear Indicator
When the TR Indicator is on
When the UL Indicator is on
⑩.
SOURCES: select balanced or single-ended input
.
⑪ Working State Indicator/Mute Indicator
Used to indicate the working state. The indicator will
be on when it is working normally. The indicator will
flicker for 30 seconds when it delays to work. The
indicator will keep flickering when it is at mute state.
.
⑫ Volume Knob
Used to control volume
Polarity Diagram for 6.35mm
Headphone Jack.
L+
L-
R+
R-
Polarity Diagram for 4.4mm
Balanced Headphone Jack
Polarity Diagram for 4 PIN XLR
Balanced Headphone Jack
: Triode working state
: Ultralinear working state
8