DataLocker DL3 Manual do utilizador - Página 6

Procurar online ou descarregar pdf Manual do utilizador para Armazenamento DataLocker DL3. DataLocker DL3 7 páginas. With rfid
Também para DataLocker DL3: Manual de configuração (2 páginas)

Imprimir página

Section VI: Setting up the RFID Authentication Module

The DL3 features an optional RFID module for a 2

Step 1: After entering the Administrator Password, touch the

"Setup" key

Step 2: Touch the "System" menu option.

Step 3: Touch the "=>" key to enter the second menu of

system options. Select the "RFID" option.

Section VII: Setting up the Virtual CD Partition

The DL3 supports the creation of custom "Virtual CDs" or VCD. A VCD is a drive partition which is recognized by your operating

system as a physical CD-ROM with its own unique drive letter. A VCD is "Read Only" and can only be overwritten with the VCD

Utility. VCD are commonly used to store virtual machines, documentation, and executable programs.

Step 1: Download the VCD Creation utility from

Step 2: In the System menu, touch the "Virtual CD" option and enable it.

Step 3: Extract and run the utility on a Windows XP + based computer.

Step 4: Select your ISO drive image. For instructions on creating an ISO disk image, please consult your operating system

instructions.

Note:

The DL3 will only support ISO images up to 4.7GB in size.

The new Virtual CD partition will NOT be encrypted; however, it will be "Read Only" and accessible only after entering the correct

User or Administrator Password.

factor of authentication.

Step 4: Place the supplied RFID tag near the bottom right

hand corner of the DL3 until you hear a "beep".

Step 5: After registering, the RFID tag value will be displayed.

Record this number in case the tag is lost or damaged.

Step 6: A total of 3 RFID tags may be paired with each DL3.