ADE 90612-30 Manual de instruções - Página 5
Procurar online ou descarregar pdf Manual de instruções para Balanças ADE 90612-30. ADE 90612-30 12 páginas. Electronic table scales, portion scale
Power supply of the scale
The power supply of the scale is done with the integrated rechargeable battery or the IEC
Power Connector. Before connecting the mains cable with the scale make sure that the type of
current is corresponding with the type of current mentioned on the type label.
The battery pack is already installed in the base of the scale.
-
Charge the power-pack by using the mains adapter and connect the jack firmly.
-
Complete first charging of power-pack needs 24 hours.
The full battery life is approx. 100 hours.
-
If power-pack needs recharging there will be an arrow above the low battery symbol on
-
the display. Still the scale will operate for about 10 hours after which it will automatically
switch off to protect the battery.
You can also identify status of battery charging by the colour of the LED control light
-
placed in the right hand corner above the display. When the scale is plugged into mains
the power pack will be recharged automatically. LED is illuminated green the batteries
have full charge. If it is red the battery is nearly discharged and yellow indicates the
battery is under charge.
Battery life becomes weaker if lifetime after charging becomes shorter. In this case
-
contact your local dealer or service partner.
Please make sure the local voltage supply corresponds to the indication printed on the
-
adapter.
Positioning of the scale
Take the scale out of the packaging and place the scale on a plane and stable surface. The
surrounding has to be clean and dry. The scale should not be placed near to open windows or
doors, air conditioning systems or fan heaters, because draught could influence the measuring
results.
Place the plastic tray platform on the scale by placing the four pins in the appropriate holes.
Then place the stainless steel weighing platform on the platform.
Make sure all four feet of the platform have direct contact to the surface.
The spirit level of the scale is an additional tool to make sure the scale is carefully positioned
and offers best results when the air bubble is centered.
The alignment of the scale must be checked and
corrected every time the location of the scale is
changed!
90612-30-180320-Rev009-UM-en
4