Elsner CasaConnect KNX Manual de início rápido

Procurar online ou descarregar pdf Manual de início rápido para Sistemas de controlo Elsner CasaConnect KNX. Elsner CasaConnect KNX 2 páginas. Control center

Imprimir página

CasaConnect KNX Control Center:

First step

Article number 71200

The manual with additional information about commissioning,

functions and operation of the control center CasaConnect

KNX can be downloaded from www.elsner-elektronik.de in the

menu area "Service/Downloads".

Description

The CasaConnect KNX Control Center is a control unit for the KNX building

bus system. The graphical touchscreen and the integrated automatic functions al-

low easy central setting and operation of the technical equipment installed in the

building. The basic configuration is made using ETS.

Please use these operating instructions in order to match the automatic functions

to your needs and to facilitate comfortable manual operation.

Functions and properties of the CasaConnect KNX control center:

•

KNX controls with access to the participants in the KNX building system

•

Colour touch-display 10.1 inches for manual operation, for system set-up

and for setting the basic and automatic functions.

•

Network connection via LAN or WLAN

•

Browser for displaying websites, streaming, etc.

•

Remote access required via network for system set-up, diagnostics and

activation by the user

•

Slide show from SD card as screen saver

•

Data storage on SD card (backup of the settings)

•

Integrated loudspeaker (4 tweeters, 1 broadband loudspeaker)

•

24 Scenes for calling up individually set actuation positions and switching

conditions. With a scene, multiple motors and devices are addressed

simultaneously so that a suitable atmosphere is created with the touch of a

finger ("TV", "Eating", etc.).

•

80 channels type A for motors (blinds, shutters, awnings, windows), fans

and lights (switching, dimming, RGB(W), colour temperature). Each with

extensive automatic functions

•

120 channels type B for control and display elements (dimmers, buttons),

sensors, alarms, and the transmission of floating point values and text

messages

•

15 channels type C, which are used as temperature regulator extensions,

i.e. a heating of cooling system is controlled with this according to the KNX

requirements for HVAC applications

•

3 alarm objects and 4 central objects with function allocation on the

display

•

Individually settable presence simulation

•

Safety module for messages from an alarm system with memory for

event log

•

Integrated HCL(Human Centric Lighting) controls: The biodynamic light

controls change light colour and brightness over the course of the day

Scope of delivery

•

Central control and operating unit

•

SD card in card slot

Safety and operating instructions

General installation notes

Installation, testing, operational start-up and troubleshooting should

only be performed by an electrician.

CAUTION!

Live voltage!

There are unprotected live components inside the device.

•

When planning and installing electrical systems, observe the

applicable directives, regulations and provisions of the

respective country.

•

Ensure that the device or system can be disconnected. During

installation, disconnect all cables from the power supply and

take safety precautions against unintentional switch-on.

CasaConnect KNX Control Center

•

Do not use the device if it is damaged.

•

Take the device or system out of service and secure it against

unintentional use, if it can be assumed, that risk-free operation is

no longer guaranteed.

The device is only to be used for the intended purpose described in this manual.

Any improper modification or failure to follow the operating instructions voids

any and all warranty and guarantee claims.

After unpacking the device, check it immediately for possible mechanical damage.

If it has been damaged in transport, inform the supplier immediately.

The device may only be used as a fixed-site installation; that means only when as-

sembled and after conclusion of all installation and operational start-up tasks and

only in the surroundings designated for it.

Elsner Elektronik is not liable for any changes in norms and standards which may

occur after publication of these operating instructions.

Safety information about automatic and alarm func-

tions

WARNING!

Risk of injury from automatically moving components!

System parts may start automatically as a result of the automatic

controls and can put people in danger.

•

People must not enter the movement range of

motorised moving parts.

•

If staying outside the building, make sure that the return

path/access is not blocked (danger of being locked out).

•

During maintenance and cleaning work, switch off

the system.

Rain alarm for automatically controlled windows:

If rain is entering, it may be some time before rain is detected by the sensors in

the system, depending on the amount of rain and outside temperature. In addi-

tion, a closing time for electric windows or sliding roofs has to be included in the

calculation. Moisture-sensitive objects should therefore not be placed in areas

where thy could be damaged by entering precipitation.

Icing-up of rails of the shades:

Be aware that the rails of blinds, awnings and shutters, which are fitted outside,

can ice up. If a motor is then moved, shades and motors can be damaged.

Power outage, maintenance work, etc.

If there is a power outage or bus voltage failure, no commands, safety or protec-

tion functions (e.g. secure position in there is a wind or rain alarm) can be execut-

ed in the KNX system! If the full extent of functions is also to be guaranteed if the

mains power fails, an emergency generator with corresponding switching from

mains to emergency operation should be installed on site.

Settings stored in the program are also retained after the power outage.

After a restart (e.g. restoration of power after a power outage or after a manual

reset), motors and devices, for which an automatic reset is set, are in automatic

mode.

Installation

Procedure for commissioning

1. The installation of the control center and the other KNX participants must be

carried out by an electrician. Information in the installation instructions, for ex-

ample also about the installation location, must be observed.

See manual, chapter 3 Installation and commissioning.

2. After completing the installation work, the KNX integration in the control

center must be performed in the ETS.

See manual, chapter 4 Basic settings in the ETS.

3. In the System > Set screen menu, the control center have to be fundamentally

set up.

See manual, chapter 5.2 The "Set screen" menu.

4. Further settings for time receipt, screen saver, network connection, access

code, updates etc. can be made at any time in the System > System settings

menu.

See manual, chapter 5.3 System setting.

5. The Automatic functions have to be adjusted in the System > Set automatic

menu to the structural situation and the individual presettings of the users.

See manual, chapter 6 Automatic.

Operating system

The CasaConnect KNX works with the Android operating system. However, the

control center work independently so no third-party Apps may be installed!

Protective film

Remove the protective film from the display. Otherwise, there is a risk that the

touch operation will be deactivated. If this should happen, the control center must

be restarted so that the touch display works again.

Overview of homepage, navigation

With the CasaConnect KNX Control Center you can centrally operate the tech-

nology connected via the KNX bus, e.g. raise and lower shades, switch devices on

and off, and dim lights. All basic and automatic settings are also shown on the dis-

play after the basic configuration has been set in the ETS.

CasaConnect KNX Control Center • Version: 21.01.2021 • Technical changes and errors excepted. • Elsner Elektronik GmbH • Sohlengrund 16 • 75395 Ostelsheim • Germany • www.elsner-elektronik.de • Technical Service: +49 (0) 7033 / 30945-250

Top menu bar

Display

and

Setting

range

Bottom navigation menu

Top menu bar:

The internet browser (Open website) and Volume can be reached at any time via

the top menu bar. Time and date are displayed. Clicking the alarm icon displays

the last active alarm messages. In addition, the start button for the slide show ap-

pears here as soon as an SD card with pictures is loaded.

Menu left links (start menu):

In the menu on the left-hand side you can see the System menu, via which you

can reach all basic and automatic settings.

Via the Manual menu you can set the position and condition for the motors and

devices configured in the ETS.

In the Safety module the alarm system can be switched on or off, open alarms are

displayed and the last 64 events in the event memory can be viewed.

In the Presence simulation menu, the simulation is switched on or off.

The selected Favourites for the manual operation and the websites saved as Book-

marks are displayed here.

So that the menu item is displayed in the Manual menu and/or in the Start menu,

the display has to be activated in the setting "Manual menu" in the installation set-

tings.

System > Set screen > ... > Manual menu

Display and setting area right:

The start image of the control center shows the current weather data and, if con-

figured in the ETS, other sensor data. If applicable, the display pages can be

scrolled through using the arrow in the lower area.

When navigating in the settings (submenus), the functions/parameters are dis-

played and set here.

Bottom navigation menu:

The bottom display edge contains a navigation menu with "Back" arrow and

a circle. Tap the circle to return to the start page. If the start page is active, stay on

the circle longer to activate the screen saver.

Actuate motors and switch devices

Additional information about the display and control possibilities is contained in

Operation.

Example: Move blinds manually

 Start menu > Manual

Sliding bar position

Field for

Selection

informa-

tion icons

Position

Info

Control

buttons

Example: Dim lights

 Start menu > Manual

Field for

Selection

informa-

tion icons

Status

Info

Control

buttons

Setup scene

In scenes, you define the status of various motors and devices so that they can

then be accessed with just one push of a button. You can also specify, for exam-

ple, that the light should be dimmed and the shutters closed at the same time, and

save this as "TV evening" scene.

Scenes can only be configured directly on the CasaConnect KNX Control

Center and not in the ETS. However, the configured scenes can be used via the

input/output object 22 ("Call scene") in the KNX system.

24 scenes are available in the CasaConnect KNX Control Center.

 System > Set screen > Scenes

Select a scene from the list on the right and enter the Name and display in the

manual menus.

Channels:

Select which motors/devices are assigned to the scene. Set the actuation position

for each device, e.g. On or Off.

Safety module

In the safety module, motion detectors and/or door contacts, for example, can be

monitored and specific alarm signals can be executed and/or alarm messages

sent to email addresses when they are activated.

 System > Set screen > > Safety module

Set the Name and display in the Manual menus.

Live switching:

Switching delay external:

Set the live switching delay if a detector is installed in the entrance area. As a re-

sult, you have time to leave the house during the delay before the detectors in the

entrance area are live. This delay time only applies to external live switching, not

at the control center.

Alarm delay:

Set the alarm delay here. If a detector is triggered in the entrance area, for which

a delay has been set, the alarm is only reported after the end of this time.

Display activation acknowledgement:

This is where you set how long the message, which has been successfully activat-

ed, is displayed and at the same time a "1" is sent to the KNX bus.

Display error message:

This where you set how long an error message is displayed if activation failed.

Deactivation code for external live:

If desired, specify a code here for deactivating the external live switching.

Alarm:

Signal message duration:

Set the activation duration here, i.e. how long the various signals (flashing light,

siren, internal signal) remain on after an alarm message.

Assign signal:

This is where you assign the different signals to the various alarm types.

•

External live: The user is outside the building. All indoor and outer skin

alarms are live.

•

Internal live: The user is in the building. Only the outer skin alarms are live.

•

Not live: Neither the indoor nor the outer skin alarm is live.

For each alarm status set, specify which alarm signal should be activated for the

different live statuses.

Recipient for notifications:

Assign email recipients for the various alarm types here And for each alarm status

set, specify which email recipient should be informed of the different live statuses.

The email addresses have to be entered beforehand.

 System > System setting > Email message

Edit text messages:

Edit the text messages, which are displayed on the screen and sent to the KNX

bus. Live switching texts for various statuses, alarm texts, other texts.

Presence simulation

You can call up to 16 events with the presence simulation simultaneously or con-

secutively, to give the appearance that people are in the building. A settable delay

for the start time makes the simulation more realistic.

 System > Set screen > Presence simulation

Set the Name and display in the Manual menus.

Configuration:

Select an event from the list and apply it. The start can be defined as follows:

•

Time: Event starts at specific time

•

Time and brightness: Event starts if a set brightness is undercut in a defined

period.

•

Event X: Event starts as soon as Event X has started

With a random delay, a range can be set, by which the start time of an event is

delayed.

The motor or the device / light is selected with the "Select function" button.