Datalogic DX8200A Manual rápido - Página 17
Procurar online ou descarregar pdf Manual rápido para Leitor de código de barras Datalogic DX8200A. Datalogic DX8200A 19 páginas. Laser bar code scanner
Também para Datalogic DX8200A: Manual de referência rápida (13 páginas)
Imprimir página
CAUTION-CLASS 3B LASER LIGHT WHEN OPEN
AVOID EXPOSURE TO BEAM
LASER LIGHT EMITTED
FROM THIS
APERTURE
Warning and Device Class Labels
The laser diodes used in this device are classified as Class 3B laser
products according to EN 60825-1 regulations and as Class IIIb
laser products according to CDRH regulations. As it is not possible
to apply a classification label on the laser diodes used in this
device, the following label is reproduced here:
Any violation of the optic parts in particular can cause radiation up
to the maximum level of the laser diode (30 mW at 630~680 nm).
Power Supply
This product is intended to be installed by Qualified Personnel only.
For DX8200A VDC models:
- This scanner is intended to be supplied by either a UL Listed power supply marked 'Class 2' or 'LPS', output
rated 20 - 30 V dc, minimum 1.75 A or by a UL Listed computer with LPS outputs.
- This scanner must be supplied by a Class II Power Supply Unit conforming to the EN 60950 safety
regulation.
Line Fuse Replacement (VAC Models only)
Caution - double pole/neutral fusing.
For continued protection against risk of fire, replace with same type and rating of fuse (250V,
3.15 A).
CAUTION
WEEE Compliance
LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
MAXIMUM OUTPUT RADIATION 1 mW
EMITTED WAVELENGTH 630~680 nm
TO EN 60825-1:2001
DX8200A QUICK GUIDE
DATALOGIC S.P.A. Via Candini, 2
40012 Calderara di Reno - Bologna - Italy
Manufactured
Volt
Model No.
Amp.
Serial No.
This product conforms to the applicable requirements
of 21CFR1040 at the date of manufacture.
Device Identification Label
LASER LIGHT
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
MAXIMUM OUTPUT RADIATION 30 mW
EMITTED WAVELENGTH 630~680 nm
TO EN 60825-1 (2001)
Laser Diode Class Label
17