elsner elektronik 40115 Especificações técnicas e instruções de instalação - Página 2
Procurar online ou descarregar pdf Especificações técnicas e instruções de instalação para Acessórios elsner elektronik 40115. elsner elektronik 40115 9 páginas. Indoor sensor and ventilation control
Imprimir página
1.
Description
The Ventilation Control AQS/TH PF combines sensor system and control
technology for the ventilation system. Temperature, humidity and CO
are monitored. The device controls a window (open/close in one or two steps) or a
ventilation device (one or two levels) via potential-free outputs.
Two inputs allow an interruption of the automatic system via external signals. A
continuous movement command from a connected hand-held device, a timer or a
blocking function (rain detector or similar) takes precedence.
The housing fits into standard 55 mm switching programmes and is available in two
different colours. The AQS/TH PF is equipped with two buttons for manual control of
the respective window/ventilator and for adjusting the device. The display shows
current measured values and mode and guides through the set-up menus.
Functions:
•
Measuring the CO
humidity
•
Control of a window of ventilator in one or two steps, threshold values to
be adjusted individually
•
Display of current measuring values and mode
•
2 buttons for adjustment and manual control
•
2 inputs for external actuation commands (button, timing, rain detector/
blocking function) with priority in case of continuous signal
1.0.1. Deliverables
•
Housing with display
•
CO
sensor unit
2
•
Base plate
•
8-wire connecting cable
In addition you need (not included in the deliverables):
•
Junction box Ø 60 mm, 42 mm depth
•
Frame (for insert 55 x 55 mm), compatible to the switch scheme used in the
building
1.1. Technical data
Housing
Colours
Mounting
Protection category
Ventilation Control AQS/TH PF • Version: 31.01.2017 • Technical changes and errors excepted.
level in the air, the temperature and relative air
2
Plastic (partially painted)
• bright white (similar to RAL 9016 traffic white)
• special colours on request
Flush mounting
(wall mounting in junction box
IP 20
2
Ø
Description
level of the air
2
60 mm, 42 mm depth)