elsner elektronik 70320 Especificações técnicas e instruções de instalação - Página 2
Procurar online ou descarregar pdf Especificações técnicas e instruções de instalação para Controlador elsner elektronik 70320. elsner elektronik 70320 2 páginas. Actuator for heating and cooling
Imprimir página
2.4.1. Buttons and LEDs for the output channels
The buttons on the devices can be deactivated in the ETS (active when delivered).
Buttons
brief button press (<0,5
LED shows current status (see ETS parameter:
s)
Channel LED)
button press >0,5 s
in Automatic mode: Switching to Manual mode
in Manal mode: Switching from manually ON to
manually OFF and reverse
long button press (>3 s)
Switching to Automatic mode (when activated
in ETS)
LEDs
Behaviour of the LEDs for the output channels
in Automatic mode:
Off
Actuating variable = 0%
On
Actuating variable > 0%
in Manual mode:
Flashes slowly
Manually OFF
Flashes fast
Manually ON
3.
Addressing of the device at the bus
The device is supplied with the bus address 15.15.255. You can program another ad-
dress into the ETS by overwriting the 15.15.255 address or by teaching via the pro-
gramming button.
4.
Disposal
After use, the device must be disposed of or recycled in accordance with the legal
regulations. Do not dispose of it with the household waste!
KNX K4 actuator • Version: 28.05.2020 • Technical changes and errors excepted. • Elsner Elektronik GmbH • Sohlengrund 16 • 75395 Ostelsheim • Germany • www.elsner-elektronik.de • Technical Service: +49 (0) 7033 / 30945-250
KNX K4 actuator
2