Datalogic MAGELLAN 1400I Manual de referência rápida - Página 7

Procurar online ou descarregar pdf Manual de referência rápida para Leitor de código de barras Datalogic MAGELLAN 1400I. Datalogic MAGELLAN 1400I 13 páginas. Omni-directional imaging scanner

Imprimir página

Quick Reference

Use this manual to assist in getting your installation up-and-running

quickly and efficiently. For more details, including programming infor-

mation, reference the Product Reference Guide (PRG), which is available

for viewing and download from the website listed on the back cover of

this manual.

Installation

Route the interface cable from the terminal or host. Plug the AC adapter

(if one is used) into a wall outlet and the interface (I/F) cable, then route

and attach the I/F cable to the scanner. Verify operation by presenting

known-good bar codes to the scanner. The unit should beep

flash its good read LED and send the bar code data to the host or termi-

nal. If not, refer to the Troubleshooting section of this guide.

Scanner installation is complete.

Connect

Here

Power Supply

Models require either a Listed class II or class III with a Limited Power

Source (LPS).

For the safety certification to be valid, class III input power sources must

be IEC/EN60950-1 (EN 60335-series, EN 60065 or relevant) approved.

Input: 100-240 VAC

Output: 5 V or 8-14 V (check scanner voltage option)

Max. Current: 1 A

1. Beeper and LED behavior is selectable and may have been disabled

by a previous user.

Quick Reference Guide

I/F Cable

To Host/Terminal

Max. Power: 14 W

For 220-230 VAC

adapters, the

cord must be

facing down as

shown in the

illustration. If

installed upwards,

A/C Adapter

it will pose an

(if needed)

undue strain on the

socket outlet.

and/or